The list below details, by unit, the internal components that are replaced when your strainer is remanufactured in our Baltimore, Maryland facility.

Model AL/AH Tate Elliott Twin Basket Strainer

• All gaskets and packing
• Two new perforated baskets
• Two new cast iron discs with rubber disc rings
• Two new cast iron wedges and four new steel wedge shoes
• Two new steel valve screws
• Two new brass shaft assemblies
• All stainless steel internal hardware
• Exterior steel hardware - as required
• Two new guide base assemblies and two new packing glands
• New chain and sprockets - if original unit had chain drive

Model R/S Tate Elliott Twin Basket Strainer

• All new gaskets and packing
• Two new perforated baskets
• Two cast iron discs with rubber disc rings
• Eight brass wedge shoes
• Two brass valve screw assemblies
• All cast iron packing glands
• Two cast bronze valve nuts
• Two guide indicators, two screw plug indicators and two packing box indicators
• All interior brass and stainless steel hardware
• Exterior steel hardware - as required
• New chain and sprockets - if original unit had chain drive

Model ID Tate Andale Plug Valve Strainer

• All gaskets and packing
• Two new perforated baskets
• New plug and lifting screw
• New bearing cap and bearing
• Exterior hardware - as required

Model 101 Tate Andale Twin Basket Strainer

• All gaskets and packing
• Two new perforated baskets
• Four new seats and two new valve discs
• Two new spindles and two rear bearings
• Two new glands and packing rings - if used
• All new internal hardware
• External steel hardware - as require